Specially engineered window solutions featuring high thermal break performance, multi-chambered alloy construction, and certified air-tightness designed for severe sub-zero winters and arid summer heat.
Multi-cavity thermal break frame with double/triple Low-E glass build-up. Engineered for heavy urban noise reduction (STC 42dB) and high insulation performance in residential towers.
Contact Us
NFRC-certified precision-bent aluminium arches equipped with multi-point European lock hardware and dual-density EPDM weather seals for luxury villa estates.
Contact Us
Custom structural glazing profile combining classic European arched aesthetics with heavy-duty acoustic and thermal protection for self-built homes and luxury villas.
Contact Us
Patented micro-ventilation acoustic system allowing continuous clean air exchange while blocking urban dust storms and severe traffic noise in commercial projects.
Contact Us
Triple-pane argon-filled unit fitted with PA66 GF25 thermal breaks and integrated insect screen mesh. Designed to withstand -40°C Kazakh steppe winters with a 5-year warranty.
Contact Us
Internal architectural Georgian bar detailing combined with thermal break profiles and high-impact toughened security glass for residential developments.
Contact Us
Ultra-low U-value (0.75 W/m²K) Passive House certified window system utilizing heavy multi-chamber polyamides to virtually eliminate thermal bridging in extreme cold climates.
Contact Us
Heavy-duty commercial casement system engineered for high wind load resistance on multi-story hospitality towers, featuring heavy double glazing and key locks.
Contact UsDesigning fenestration for Kazakhstan demands solving one of the world's most severe climatic challenges: annual temperature swings exceeding 80°C, high elevation UV index in Almaty, and ferocious steppe wind loads in Astana.
Kazakhstan operates under an extreme continental climate regime. In Northern and Central regions like Astana (Nur-Sultan) and Karaganda, winter temperatures routinely drop below -40°C accompanied by blizzard winds reaching up to 35 m/s. Conversely, summer temperatures in southern hubs like Shymkent and western oil hubs like Atyrau climb past +40°C under intense solar radiation.
Standard architectural aluminium profiles without advanced thermal engineering suffer from severe thermal bridging, interior frost formation, rubber seal embrittlement, and frame distortion due to unequal expansion coefficient rates between exterior and interior profile faces. As a specialized B2B smart window manufacturer supplying the Kazakhstan market, our engineering team custom-configures every profile to meet rigid regional GOST and SNiP structural and thermal standards.
We utilize 24mm to 39mm wide glass-fiber reinforced polyamide (PA66 GF25) thermal strips inserted between interior and exterior aluminium chambers, preventing cold bridging and condensation drip under extreme freezing conditions.
Insulated Glass Units (IGU) feature dual silver-coated Low-E glass panes, warm-edge composite spacers, and 90%+ Argon gas fill, achieving total solar heat gain control (SHGC) in summer while trapping radiant warmth in winter.
Custom reinforced mullions with structural steel inserts and 6063-T6 architectural alloy wall thicknesses ranging from 2.0mm to 3.0mm, tested to resist high wind pressures exceeding 4.5 kPa in open plains.
Modern architectural trends in Almaty and Astana are shifting rapidly toward large-format minimalist glazing paired with intelligent building control systems.
Our smart glass integrates a Polymer Dispersed Liquid Crystal (PDLC) film encapsulated between dual toughened glass layers. With a fraction of a second response time, the glass transitions from opaque frost to crystal transparent via wall switch, smartphone app, or automated building management systems (BMS).
Ideal for executive boardrooms, luxury penthouse master suites, and private clinic partitions across Kazakhstan’s commercial infrastructure.
Eliminating conventional mechanical rollers and bottom-track friction, our patented Magnetic Levitation Sliding System uses electromagnetic coils to suspend sliding panels up to 600kg in mid-air. Operation is virtually silent (< 25 dB) and completely frictionless, drastically extending component life cycles in harsh dusty environments.
Compare our engineered window family specifications to match specific architectural and climate requirements for Kazakhstan building zones.
| System Type | Thermal U-Value (W/m²K) | Acoustic STC Rating | Wind Resistance (Pa) | Glazing Options | Ideal Kazakh Region Application |
|---|---|---|---|---|---|
| NT91 Passive House Window | 0.75 - 0.85 | 45 dB | ≥ 4500 Pa | Triple / Quad Low-E Argon (48mm) | Astana, Karaganda, North KZ (Extreme Cold) |
| DERCHI Soundproof Casement | 1.10 - 1.30 | 42 dB | ≥ 3500 Pa | Double / Triple Low-E (32mm - 40mm) | Almaty Urban Centers & High-Rise Apartments |
| Maglev Smart Slider | 1.20 - 1.40 | 38 dB | ≥ 3000 Pa | Double Toughened Low-E / Smart Tint | Luxury Villas, Resorts & Penthouse Terraces |
| Arched Thermal Break Window | 1.25 - 1.45 | 36 dB | ≥ 2800 Pa | Double Glazed Georgian Bar / Low-E | Classic Villas & Heritage Renovations |
| Patented Acoustic Vent Window | 1.15 - 1.35 | 44 dB | ≥ 3200 Pa | Laminated Triple Insulated Unit | Hospitals, Schools & Highway-Facing Structures |
From snow-covered mountain chalets to windy administrative capital towers, our smart windows are tailored to regional engineering requirements.
Challenge: Sustained -35°C winter cold, severe frost penetration, and 30+ m/s wind loads on high-rise glass curtain walls.
Solution: Implementation of NT91 Passive House triple-glazed units equipped with structural polyamide thermal breaks and warm-edge technology, reducing winter heating costs by over 42%.
Challenge: Extreme daily ambient temperature swings, high UV exposure, and seismic activity considerations (Zone 9).
Solution: Maglev Smart Sliding Doors featuring double-laminated toughened Low-E glass, heavy seismic corner anchoring connectors, and motorization integrated with smart home control.
Challenge: High summer solar radiation, intense airborne dust, and street noise management.
Solution: DERCHI Casement windows with electrochromic privacy glass, micro-ventilation acoustic grills, and dual EPDM dust gasket seals keeping interior suites cool and peaceful.
Our state-of-the-art manufacturing infrastructure seamlessly manages every step of window production under one roof, guaranteeing strict compliance for international importers and project developers.
We extrude exclusively with prime 6063-T5 and T6 structural aluminium alloys with tensile strength exceeding 205 MPa.
Surface treatments include 60-80μm powder coating or 15-25μm anodizing, certified against salt spray, fade, and chalking.
100% dry assembly checks, water tightness chamber testing, diagonal squareness verification, and acoustic cycle testing.
Reinforced steel-banded wooden crates, A-frame glass racks, moisture-proof film, and fully labeled hardware packs for smooth customs.
Direct answers regarding regional compliance, delivery routes, thermal performance, and customized B2B manufacturing orders.
Yes. Our thermal break aluminium windows and triple-glazed units are specifically engineered to satisfy regional GOST 23166-99 (Window Blocks) and SNiP RK 2.04-03-2002 (Thermal Performance of Buildings) regulations. We provide factory test certificates covering air permeability, water penetration resistance (Class 1A/9A), wind load resistance (Class A), and thermal conductivity values for smooth regional technical approval.
Interior frosting and condensation occur when frame temperatures drop below the dew point due to thermal bridging. We resolve this by using multi-chamber PA66 GF25 polyamide thermal breaks combined with warm-edge composite spacers (not standard conductive aluminium spacers) and 90% Argon gas filling between double Low-E coated glass panes. This build-up maintains interior frame surface temperatures well above condensation thresholds even during extreme sub-zero weather.
Standard production lead time ranges from 4 to 6 weeks depending on custom color finishes and glass specifications. Shipments to Kazakhstan are typically routed via direct rail or container truck freight through the Khorgos / Dostyk land ports directly to bonded customs terminals in Almaty, Astana, or Shymkent. Overland transit usually takes approximately 10 to 18 days from factory dispatch.
Yes. Our switchable PDLC smart glass film is sealed inside a hermetically insulated glass unit (IGU) containing dry argon gas and warm-edge spacers. The operating temperature range of our smart glass assemblies spans from -35°C to +75°C. For extreme northern regions, the PDLC layer is positioned on the inner chamber of a triple-glazed unit so it remains insulated from direct sub-zero exposure.
We outfit our fenestration systems with top-tier European multi-point locking hardware (such as Siegenia, Roto, or Hoppe) as well as premium proprietary heavy-duty stainless steel mechanisms. Profile finishes are coated with weather-resistant AkzoNobel or PPG Qualicoat powders tested against severe UV radiation and industrial atmospheric pollution.
For direct export shipments to Kazakhstan, we work on a project-scope basis or full container load (FCL / 20GP or 40HQ). For developer projects or local distributors evaluating our fabrication quality, custom sample trial orders or small-batch villa scopes can be accommodated by arrangement.
