Explore our high-performance architectural systems, engineered with premium 6063-T5/T6 aluminium alloys, European multi-point locking hardware, and advanced acoustic/thermal glazing configurations.
Equipped with double-glazed Low-E acoustic glass and thermal break profiles designed to suppress up to 42dB of urban ambient noise in high-density areas like Bogotá and Medellín.
Get Catalog
NFRC-certified high-insulation double-glazed systems ideal for luxury hillside villas in Rionegro and Sabaneta requiring custom geometric profiles.
Get Catalog
Heavy-duty structural framework engineered for wind-load pressures up to 3000 Pa, perfect for coastal high-rise towers in Cartagena and Barranquilla.
Get Catalog
Features integrated trickle ventilation channels while maintaining a 99% airtight seal when closed to preserve indoor air quality and thermal comfort.
Get Catalog
STC-rated noise reduction system with integrated folding flyscreens and multi-chamber polyamide thermal barriers, offering extreme durability.
Get Catalog
Blends traditional architectural mullions with ultra-narrow 18mm sightlines, providing structural security without sacrificing natural daylighting.
Get Catalog
Engineered for sustainable development projects across Colombia aiming for EDGE or LEED certification, featuring U-values under 0.8 W/m²K.
Get Catalog
Heavy-traffic, concealed sub-frame sliding system with dynamic flush thresholds for seamless indoor-outdoor hospitality spaces in Santa Marta and Cali.
Get CatalogA comprehensive analysis of structural dynamics, thermal insulation demand, and coastal corrosion resistance required for architectural glazing imports into Colombia.
Projects constructed at altitudes above 2,500 meters (such as Bogotá’s Sabana region) encounter extreme diurnal temperature swings fluctuating from 4°C at night to 22°C under direct solar exposure. Standard non-thermal break profiles suffer from rapid thermal expansion, leading to frame warping and perimeter sealant failure. Our factory supplies Polyamide PA66 thermal barriers and dual-seal argon-filled Insulated Glass Units (IGUs) specifically calibrated for high-altitude barometric pressures, eliminating IGU implosion risks and thermal transfer.
Caribbean coastal developments face rigorous exposure to airborne chlorides and severe tropical storm pressures. We utilize marine-grade Qualicoat Class 2 powder coatings (60-80 microns) and 25-micron anodized surface finishes that resist salt-fog oxidation for up to 3,000 hours under ASTM B117 testing. Furthermore, our ultra-narrow interlocks are internally reinforced with high-tensile steel stiffeners to withstand wind pressures exceeding 3.5 kPa in seaside high-rises.
In mid-altitude regions known as the "City of Eternal Spring," the focus shifts to maximizing uninterrupted natural light while preventing afternoon solar heat buildup. Our minimalist sliding doors incorporate Solar Control Low-E glass build-ups (SHGC < 0.35, VLT > 65%), allowing developers to create massive floor-to-ceiling glass facades that maintain fresh indoor air movement through flush multi-track openings without increasing HVAC power consumption.
Quantifiable engineering parameters delivered across every export consignment originating from our manufacturing complex.
Review structural specifications and material build-ups tailored for commercial contractors, architects, and real estate developers in Colombia.
| Performance Parameter | Standard Market Specification | Tejjsons Export-Grade Engineering | Colombian Site Application Benefit |
|---|---|---|---|
| Aluminium Profile Alloy | Recycled / Standard 6063-T5 (1.4mm wall) | Primary 6063-T6 Architectural Grade (2.0mm–3.0mm wall) | Prevents frame deflection on wide spans up to 6 meters high in coastal winds. |
| Thermal Barrier System | Direct PVC or Non-thermal break profile | Polyamide PA66-GF25 Structural Thermal Struts | Blocks thermal bridging in Bogotá high-altitude homes, cutting heating demands. |
| Glass Build-up & Gas | Single Monolithic 6mm or Air-filled DGU | Double/Triple Glazed Toughened Low-E + Argon Gas + Warm Edge | Controls solar radiation in Cali & Cartagena while preventing interior condensation. |
| Roller & Track Engineering | Bottom Nylon Rollers on exposed aluminium track | Concealed Stainless Steel Heavy-Duty Carriage / Maglev System | Supports door leaves up to 500kg with fingertip motion and zero track corrosion. |
| Water Tightness Rating | 150 Pa – 300 Pa (Standard rain exposure) | Class 9A (600 Pa) with Sub-Floor Hidden Drainage Track | Prevents rainwater ingress during torrential high-volume tropical downpours. |
| Surface Treatment Finish | Standard Electrostatic Powder Coating (<45µm) | Qualicoat Architectural Coating (60-80µm) / Anodized 25µm | Resists UV degradation and saltwater air in coastal locations like Santa Marta. |
Custom-engineered sliding door systems integrated into key residential, commercial, and hospitality typologies.
Modern high-rise residential projects require massive glass expanses to frame views of the Aburrá Valley. Our concealed frame minimalist sliding doors sink into the floor finish, creating a continuous zero-threshold transition between indoor living spaces and exterior balconies.
Hospitality developments in coastal islands demand non-corrosive, insect-proof glass sliding systems. We supply integrated motorized zip screens and magnetic levitation doors that allow resort guests to glide heavy glass panels effortlessly while enjoying hurricane-proof security during coastal storms.
For high-density office zones, our smart glass minimalist sliding partitions switch from clear transparency to total frosted privacy at the touch of a button, providing modern acoustic isolation for executive conference spaces.
With over 25 years of specialized aluminium and glass engineering expertise, our factory operates fully automated CNC machining lines, insulating glass assembly plants, and rigid pre-dispatch quality checks.
Our structural engineers review your CAD/BIM architectural files and issue structural shop drawings, elevation profiles, and drainage calculations prior to profile cutting.
German-built multi-axis CNC machines execute corner joints, hardware lock cutouts, and hidden drainage slots with sub-millimeter precision tolerances.
Every order undergoes 100% dry-assembly, squareness check, diagonal measurement, and sliding smooth-test in our facility before packing into export crates.
Glass units are secured in heavy-duty steel or timber A-frame crates with foam corner protection, while profiles are wrapped in shrink-film and wood cases for container shipping to Cartagena or Buenaventura.
How we streamline architectural glass door orders from initial drawing review to customs clearance at Colombian ports.
Submit architectural plans, opening schedules, and structural wind-load requirements to our export team.
Receive comprehensive shop drawings, hardware specifications, thermal values, and formal C&F price estimates.
Profile extrusion, powder coating, glass toughening, double-seal IGU assembly, and CNC hardware processing.
Factory dry-assembly validation followed by reinforced crate packaging with custom labeling and loading photos.
Direct container dispatch to Port of Buenaventura (Pacific) or Port of Cartagena (Atlantic) with full BL, Packing List, and CO documentation for DIAN clearance.
Direct engineering answers regarding custom manufacturing, ocean logistics, installation, and compliance for Colombian architectural projects.
Send your opening schedules, architectural elevation drawings, or target performance requirements to our senior engineering team. Receive customized CAD details, thermal performance data, and competitive factory-direct pricing within 24 hours.
